AI Data Center Liquid Cooling Case: CJAN LCH032-SD with 25% Ethylene Glycol Coolant
Liquid cooling hose selection depends on more than the coolant name. The fluid composition, operating conditions, hose construction and installation environment all need to be considered together.
In this customer application, CJAN LCH032-SD hose is used in a water-based cooling mixture containing 25% ethylene glycol. The customer describes the operating condition as atmospheric pressure. This case outlines the application conditions and the practical points to consider when installing and maintaining the hose.
1. Application Overview
The application uses a water-based coolant mixture with 25% ethylene glycol. CJAN LCH032-SD was selected for the hose connection in this liquid cooling application.
| Hose model | CJAN LCH032-SD |
|---|---|
| Coolant type | Water-based mixture |
| Ethylene glycol concentration | 25% (concentration basis not specified) |
| Operating condition | Atmospheric pressure, as described by the customer |
2. Why Coolant Compatibility Matters
A hose used in a liquid cooling circuit remains in contact with the circulating coolant throughout operation. For this reason, material compatibility should be considered alongside hose dimensions, installation layout and operating conditions.
Ethylene glycol is commonly used in water-based cooling mixtures. However, the actual coolant formulation matters. Concentration, additives, water quality and operating temperature can all affect material compatibility and the condition of the fluid over time.
For this application, the customer specified a water-based mixture containing 25% ethylene glycol. The coolant formulation should be documented and kept consistent with the requirements of the complete cooling system and the hose manufacturer's compatibility guidance.
3. LCH032-SD in the Application
The selected hose model is CJAN LCH032-SD. When evaluating a hose for this type of application, the selection should be based on the actual system conditions rather than the model name alone.
Key points include the coolant composition, operating temperature, system pressure, required flow, connection design, hose routing and minimum bending requirements. These factors should be checked together before installation.
The product's published specifications describe the hose's rated performance under defined test and operating conditions. They should not be treated as the actual pressure or temperature of this customer's system.
4. Installation Considerations
Correct installation helps reduce unnecessary mechanical stress on the hose and its connections. During installation, the following points should be checked:
- Keep the hose routing within the manufacturer's recommended bending radius.
- Avoid twisting the hose while connecting or tightening fittings.
- Prevent contact with sharp edges, hot surfaces or moving components.
- Ensure that the hose is not pulled, compressed or forced into position.
- Check that the fittings and connection method are suitable for the system.
After installation, inspect the hose and connection points before putting the cooling circuit into service. Any pressure or leak checks should follow the system's approved commissioning procedure.
5. Coolant and Hose Maintenance
Maintenance should cover both the coolant and the hose assembly. A stable coolant mixture does not eliminate the need for periodic inspection.
Coolant management
- Record the specified ethylene glycol concentration and the method used to verify it.
- Check the coolant condition during scheduled maintenance.
- Use the system-approved coolant when topping up or replacing fluid.
- Monitor changes in coolant appearance or signs of contamination.
Hose and connection inspection
- Look for cracks, cuts, abrasion, deformation or other visible damage.
- Check fittings and connection points for signs of leakage.
- Review hose routing for kinks, excessive bending or contact with surrounding equipment.
- Keep inspection and replacement records for maintenance traceability.
Inspection intervals should be determined by the system operator according to operating conditions, maintenance procedures and equipment requirements.
6. Application Takeaways
This application provides a practical example of CJAN LCH032-SD used with a water-based coolant containing 25% ethylene glycol under the operating condition described by the customer as atmospheric pressure.
The main consideration is not simply whether a hose can be connected to a cooling circuit. Coolant compatibility, system conditions, installation quality and ongoing inspection all contribute to the reliability of a hose assembly.
For a similar application, confirm the complete coolant formulation and operating parameters before finalizing hose selection.
Learn more about CJAN LCH-SD liquid cooling hose and CJAN liquid cooling solutions .












GLOBAL






